Kommentoi arvostelua

Kun levy on ollut käytössä vasta muutaman viikon, eikä nopeudellakaan ole minulle kovin suurta merkitystä kunhan on SSD, on paha antaa kovin syvällistä arviota. Siksi arvosanat ovat enemmänkin hatusta heitettyjä. Levy toimi heittämällä ja Debian Linuxin asennuksessa ei ollut mitään ongelmaa.

Linuxisteja eniten kiinnostavan yksityiskohdan, jonka voin antaa, on varmaankin mitä smartctl sanoo levystä:

smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-9-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, 
www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model:     WDC  WDS500G2B0A-00SM50
Serial Number:    20156L479803
LU WWN Device Id: 5 001b44 4a799c23a
Firmware Version: 401020WD
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Jul 15 15:14:00 2020 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:  (0x00)  Offline data collection activity
          was never started.
          Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)  The previous self-test routine completed
          without error or no self-test has ever 
          been run.
Total time to complete Offline 
data collection:     (    0) seconds.
Offline data collection
capabilities:        (0x11) SMART execute Offline immediate.
          No Auto Offline data collection support.
          Suspend Offline collection upon new
          command.
          No Offline surface scan supported.
          Self-test supported.
          No Conveyance Self-test supported.
          No Selective Self-test supported.
 SMART capabilities:            (0x0003)  Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01)  Error logging supported.
          General Purpose Logging supported.
Short self-test routine 
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    (  10) minutes.
SMART Attributes Data Structure revision number: 4
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0032   100   100   ---    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   ---    Old_age   Always       -       531
 12 Power_Cycle_Count       0x0032   100   100   ---    Old_age   Always       -       8
165 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       2293782
166 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       0
167 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       22
168 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       1
169 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       238
170 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       0
171 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       0
172 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       0
173 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       0
174 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       3
184 End-to-End_Error        0x0032   100   100   ---    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   ---    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   ---    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   073   042   ---    Old_age   Always       -       27 (Min/Max 23/42)
199 UDMA_CRC_Error_Count    0x0032   100   100   ---    Old_age   Always       -       0
230 Unknown_SSD_Attribute   0x0032   001   001   ---    Old_age   Always       -       17179869188
232 Available_Reservd_Space 0x0033   100   100   004    Pre-fail  Always       -       100
233 Media_Wearout_Indicator 0x0032   100   100   ---    Old_age   Always       -       205
234 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       277
241 Total_LBAs_Written      0x0030   253   253   ---    Old_age   Offline      -       253
242 Total_LBAs_Read         0x0030   253   253   ---    Old_age   Offline      -       136
244 Unknown_Attribute       0x0032   000   100   ---    Old_age   Always       -       0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported