Kun levy on ollut käytössä vasta muutaman viikon, eikä nopeudellakaan ole minulle kovin suurta merkitystä kunhan on SSD, on paha antaa kovin syvällistä arviota. Siksi arvosanat ovat enemmänkin hatusta heitettyjä. Levy toimi heittämällä ja Debian Linuxin asennuksessa ei ollut mitään ongelmaa. Linuxisteja eniten kiinnostavan yksityiskohdan, jonka voin antaa, on varmaankin mitä smartctl sanoo levystä: smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-9-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WDS500G2B0A-00SM50 Serial Number: 20156L479803 LU WWN Device Id: 5 001b44 4a799c23a Firmware Version: 401020WD User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jul 15 15:14:00 2020 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 531 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 8 165 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 2293782 166 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 167 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 22 168 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 1 169 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 238 170 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 173 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 174 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 3 184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0 194 Temperature_Celsius 0x0022 073 042 --- Old_age Always - 27 (Min/Max 23/42) 199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0 230 Unknown_SSD_Attribute 0x0032 001 001 --- Old_age Always - 17179869188 232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100 233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always - 205 234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 277 241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 253 242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 136 244 Unknown_Attribute 0x0032 000 100 --- Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported